Series 3000 Stainless Race Hose
FPS Series 3000 Race Hose is manufactured to the highest aerospace-quality standards for years of trouble-free service even in the most demanding circumstances.
  • 500-1500 psi. working pressure covers all of the oil, water and fuel systems you may encounter.
  • Two layers of rugged woven stainless steel.
  • Inner layer resists collapse and the outer layer protects abrasion.
  • Unique CPFE inner liner is compatible with all hydrocarbon and alcohol based fuels, along with synthetic and natural based lubricants.
  • Operating range of –40°F to 300deg;F.
  • Designed to be used with FPS Series 2000 "Pro-Flow"
As a rule of thumb when selecting an AN hose to replace a given size automotive hose, the dash size is the nominal size in 1/16". Example: -10, is 10/16" or equivalent 5/8" automotive hose. The A-N hose will be slightly smaller due to the wall thickness of the hose.
AN Size Nom. I.D. Bulk PER FT. 20 FT. ROLL
-4 7/32" FRA 700004 FRA 720004
-6 11/32" FRA 700006 FRA 720006
-8 7/16" FRA 700008 FRA 720008
-10 9/16" FRA 700010 FRA 720010
-12 11/16" FRA 700012 FRA 720012
-16 7/8" FRA 700016 FRA 720016
-20 1-1/8" FRA 700020 --





Return to top


8000 Push-Lok General Purpose Hose
FPS Series 8000 Push-Lite Race Hose is manufactured to the same rigorous standards as our Series 3000 Stainless Race Hose. It is the perfect alternative when cost or weight is the main consideration.
  • 250 psi. maximum working pressure allows for most automative water, oil, and fuel systems.
  • Inner layer of synthetic PKR covered with a fiber braid reinforcement and wrapped with a weather-resistant textile cover.
  • Temperature range to 300°F.
  • Hose assemblies with Push-Lite Hose are over half the weight of the same stainless hose assembly.
The Series 8000 Push-Lite Hose may be used in any number of automotive applications. If you are using fittings other than our Series 8000 Push-Lite Hose Ends, be sure to measure the hose barb diameter to determine suitability. This hose is sized fractionally, but the suitability is at the sole determination of the end user.
AN Size Nom. I.D. 20 FT. ROLL
-6 3/8" FRA 820006
-8 1/2" FRA 820008
-10 5/8" FRA 820010




Return to top


Series 8600-8700 Parker Push-Lok
General Purpose Hose
Parker Push-Lok is the performance standard for a multitude of applications. It is manufactured to the same rigorous standards as all of Parker’s products. This hose performs well when used within the temperature and pressure parameters that it was designed for.
  • 250 psi. maximum pressure allows for most oil, water and fuel applications.
  • Synthetic rubber tube is covered with one layer of textile braid, combined with an outer layer of synthetic colored rubber.
  • Temperature range –40°F to 212°F.
  • Sized in fractions and may be used with any push-on style fitting.
AN Size Nom. I.D. Bulk Per FT.
Blue - - - - - Black		 20 FT. ROLL
-4 1/4" FRA 860004 FRA 870004 FRA 862004
-6 3/8" FRA 860006 FRA 870006 FRA 862006
-8 1/2" FRA 860008 FRA 870008 FRA 862008
-10 5/8" FRA 860010 FRA 870010 FRA 862010
-12 3/4" FRA 860012 FRA 870012 --
-16 1" FRA 860016 FRA 870016 FRA 862016





Tech Tip: To ease the installation of any push on hose end, first dip the end of the hose in boiling water to soften it slightly (a heat gun also works well). Clamp the hose in a vise and oil the barbs with common motor oil. Push the hose over the barbs with one smooth movement.






Return to top