| Exhaust Wrap | |||
| Wrapping headers and down pipes is an important first step in reducing underhood radiant heat. Keeping exhaust gases hotter within the exhaust system helps to decrease exhaust density and increase exhaust flow. This improves exhaust scavenging - resulting in cooler air intake temperatures, improved performance and additional horsepower. DEI Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for an easy, clean and professional installation. |
|
||
|
|
||
| Part # | Color | Description | |
| DEI 010101 | Tan | 1" x 50' roll | |
| DEI 010102 | Tan | 2" x 50' roll | |
| DEI 010103 | Tan | 2" x 100' roll | |
| DEI 010104 | Tan | 6" x 50' roll | |
| DEI 010105 | Tan | 1" x 15' roll | |
| DEI 010106 | Tan | 2" x 15' roll | |
| DEI 010107 | Black | 1" x 50' roll | |
| DEI 010108 | Black | 2" x 50' roll | |
| DEI 010120 | Black | 1" x 15' roll | |
| DEI 010121 | Black | 2" x 15' roll | |
| NOTE: Design Engineering HT Silicone Coating spray is highly recommended to penetrate, seal, protect and prolong the lifespan of exhaust wrap. | |||
| Titanium Exhaust Wrap | ||
|
DEI Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock that is extruded into fibers
and then woven into a tight weave - giving it titanium-like strength and toughness. Titanium wrap is engineered
to be stronger than typical wraps on the market today. This wrap will not shrink and its material structure is
more resistant to underhood radiant temperatures, vibration breakdowns, abrasions, and chemical and hot oil spills
than that of glass fiber exhaust wrap. Plus, Titanium wrap offers a very cool carbon fiber look as an added feature.
|
|
|
|
|
| Part # | Description | |
| DEI 010126 | 1" x 50' roll | |
| DEI 010127 | 2" x 50' roll | |
| DEI 010128 | 1" x 15' roll | |
| DEI 010129 | 2" x 15' roll | |
| DEI 010130 | 2" x 100' roll | |
| DEI 010131 | 2" x 25' roll | |
| Wrap Kit | 2 Rolls - 2" x 50' roll | |
| DEI 010136 | Wrangler JK V6 - Header Wrap Kit | |
| High Temperature (HT) Silicone Coating | ||
High Temperature (HT) Silicone Coating provclasses lasting protection for any hot surface up to
1500 degrees. DEI recommends the use of this coating with their exhaust wrap because it seals
the material and provclasses lasting protection from oil, dirt and road grime. Don't limit the use
to exhaust header wrap, because this product works well on headers, blocks, starters and even on
your grill at home.
|
 |
|
| Part # | Description | |
| DEI 010301 | Black | |
| DEI 010302 | Aluminum | |
| DEI 010303 | White | |
| Stainless Steel Locking Ties | ||
|
DEI Stainless Steel Locking Ties were designed to securely fasten DEI's exhaust wrap, however, its uses are endless.
Made of high-grade 304 stainless steel, these fireproof locking ties are able to withstand extreme underhood temperatures
in excess of 2500 degrees and have a tensile strength over 100 pounds. No matter what they are used for, DEI Stainless Steel
Locking Ties will provclasse a professionally finished look to any job quickly and easily.
|
|
| Part # | Description | |
| DEI 010201 | 8" Stainless Steel Locking Ties (8 pack, 2" diameter bundle) |
|
| DEI 010202 | 14" Stainless Steel Locking Ties (4 pack, 4" diameter bundle) |
|
| DEI 010205 | 8" & 14" Stainless Steel Locking Ties (12 pack, 8-8" long & 4-14" long) |
|
| Speed Sleeves / Exhaust Wrap Sleeves | ||
| This DEI Speed Sleeves kit provclasses everything you need to cover and protect your primary exhaust header pipes. Speed sleeves can be easily installed in tight engine compartments and, in most cases, without removing the headers. This kit is great for trouble shooting specific components that are close to the exhaust header (like ignition wires or the fuel line). |
|
|
|
|
|
| Part # | Description | |
| DEI 010114 | Speed Sleeves Kit - 2 to 6 Cylinder | |
| DEI 010115 | Speed Sleeves Kit - Up to 8 Cylinder | |
| Exhaust / Header Wrap Kits | ||
|
Everything you need for a professional installation in one kit. These DEI Exhaust/Header Wrap Kits include
2 rolls of 2" x 50' exhaust wrap, 1 can HT Silicone Coating, and Stainless Steel Locking Ties (eight 8" and
four 14"). The Header Wrap Kit is enough for any set of V8 headers and will wrap from the top of the header
(where it bolts to the heads) all the way down to the collector. Everything consclassered, these wrap kits will
save you time and money.
|
|
| Part # | Description | |
| DEI 010110 | Black Wrap w/Black HT Silicone Coating | |
| DEI 010111 | Tan Wrap w/White HT Silicone Coating | |
| DEI 010112 | Tan Wrap w/Aluminum HT Silicone Coating | |
| Motorcycle Pipe Wrap Kits | ||
| DEI 010330 | Black Wrap w/Black HT Silicone Coating | |
| DEI 010331 | Tan Wrap w/Aluminum HT Silicone Coating | |
| DEI 010332 | Tan Wrap w/White HT Silicone Coating | |